Immersion sleeves for temperature sensors
Under the type designation you will find individual accessories for mounting the temperature sensors. You can also obtain the immersion sleeves from us individually, without a sensor, as required. The immersion sleeves are made of stainless steel. Depending on the area of ​​application, you can obtain the correct immersion sleeve individually so that it can always be available on site as a replacement sleeve. The stainless steel immersion sleeves are suitable for use in non-aggressive media, up to a pressure load of 16 bar and a medium temperature of 150 ° C.
Guaranteed product quality Made in Germany

Typical applications:
– spare part
– Service accessories
– Prevention of wear
– maintenance accessories
– Customer service

Technical specifications:
Immersion sleeve stainless steel ZT / E-ES:
Pressure range: TPmax. 40 bar
Bursting range:> 40 bar
Temperature range: -60 ° C to 200 ° C
Connection: SW22
Connection thread: G1 / 2 inch (including locking screw)
Inner diameter: 6mm
Outside diameter: 8mm

Scope of delivery: Immersion sleeve 1/2 inch x 50mm stainless steel

Dimensions (HxWxD): 70x24x24mm